V-belt Dayco 5V 1120
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5V
- Series
- Wedge industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DAYCO and STARK: matching part numbers →DAYCO and MITSUBOSHI: matching part numbers →DAYCO and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO 5V 1120 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5V 1120 and any equivalents.
The Dayco 5V 1120 is a narrow wedge V-belt with a 5V profile and a length of 2844.8 mm. Before you fit it, take a few minutes to inspect the drive and sheaves. That step helps the new belt run true and last.
Check sheave grooves for wear, rust, or embedded debris. Worn grooves can let the belt sit too deep, which leads to slipping and heat. Confirm the sheaves are aligned and that the belt will sit at the correct height in the groove.
Look at the old belt as you remove it. Cracks, glazing, or missing ribs point to a drive problem, not just an old belt. If the drive uses multiple belts, replace them as a set so the load stays even across all strands.
The same size is also listed under Stark 5V 1120, Mitsuboshi 5V 1120, and Optibelt 5V 1120. We carry the Dayco 5V 1120 and can help you confirm it matches your drive. Send the part number and a photo of the belt marking for a quote.
Dimensions
- Section
- 5V
- Length
- 2844.8mm
Frequently asked questions
- What should I check on the drive before installing this belt?
- Inspect sheave grooves for wear, rust, or debris, and confirm the sheaves are aligned. A worn or misaligned drive can shorten belt life even when the belt is correct.
- How do I confirm the Dayco 5V 1120 is the right size?
- Read the marking on the back of the old belt. It should show the profile and length. The Dayco 5V 1120 is a 5V profile belt with a length of 2844.8 mm.
- What do you need to quote the Dayco 5V 1120?
- Send the part number 5V 1120 and the quantity you need by WhatsApp or email. A photo of the belt marking helps us confirm the profile and length.