V-belt Stark 5V 1060
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5V
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
MITSUBOSHI and STARK: matching part numbers →OPTIBELT and STARK: matching part numbers →DAYCO and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK 5V 1060 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5V 1060 and any equivalents.
This Stark 5V 1060 is a narrow wedge V-belt with a 5V profile and a 1060 mm length. It is used on industrial drives where a compact, high-capacity belt is required. The same size is also listed under Mitsuboshi, Optibelt, and Dayco.
Narrow wedge V-belts like this 5V profile are common on fans, pumps, compressors, and other driven equipment in plants and process lines. The 5V profile fits standard 5V sheaves. Because the belt is a wedge design, it transmits more power in a smaller cross-section than a classic V-belt of similar width.
To confirm fit, check the drive sheave groove profile and the belt length marked on the old belt. The part number 5V 1060 gives the profile and the length in millimeters. If the old belt is worn or the marking is unreadable, measure the outside length and compare it to 1060 mm, and verify that the sheave is cut for a 5V belt.
When you request a quote, send the part number 5V 1060 and the quantity. If you are replacing a belt from another brand, include that number as well so we can help confirm the correct size. We carry the Stark 5V 1060 and can suggest an equivalent if needed.
Dimensions
- Section
- 5V
Frequently asked questions
- What does the 5V 1060 part number tell me?
- The 5V indicates the profile, a narrow wedge cross-section. The 1060 is the length in millimeters. Together they define the belt size for a matching 5V sheave.
- Can I replace a 5V 1060 from another brand with this Stark belt?
- Yes, if the profile and length match. The same size is also listed under Mitsuboshi, Optibelt, and Dayco, so you can compare the marking on your old belt to confirm.
- How do I confirm the belt fits my drive before ordering?
- Check that your sheaves are 5V profile and that the required belt length is 1060 mm. If you are unsure, send the old belt marking or a photo with your quote request and we can help verify.