V-belt Stark 5V 900
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5V
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
MITSUBOSHI and STARK: matching part numbers →OPTIBELT and STARK: matching part numbers →DAYCO and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK 5V 900 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5V 900 and any equivalents.
The Stark 5V 900 is a narrow wedge V-belt with a 5V profile and a length of 900 mm. This page helps you match it to the belt you are replacing so you can request a quote with confidence.
Before you order, check the belt on the drive. Look for the marking on the back of the belt: it should show the profile and length. For this Stark belt, the profile is 5V and the length is 900 mm. Confirm that your old belt carries the same 5V profile and 900 mm length. If it does, the Stark 5V 900 is the correct size to replace it.
If the old belt is worn or the marking is unreadable, measure the outside length and compare it to 900 mm. Also confirm the cross-section matches the 5V profile. The same size is also listed under Mitsuboshi 5V 900, Optibelt 5V 900 and Dayco 5V 900, so you can use those part numbers as a reference when checking your existing belt.
When you request a quote, send the part number Stark 5V 900, or send the profile and length from your old belt. Our team replies promptly by WhatsApp or email and can help confirm the right belt or suggest an equivalent. For drives that use multiple belts, it is good practice to replace all belts in the set at the same time.
Dimensions
- Section
- 5V
Frequently asked questions
- How do I confirm the Stark 5V 900 matches my old belt?
- Check the marking on the back of your old belt for the 5V profile and 900 mm length. If both match, the Stark 5V 900 is the same size.
- What if the marking on my old belt is worn off?
- Measure the outside length and compare it to 900 mm, and confirm the cross-section matches the 5V profile. If you are unsure, send us the details and we can help confirm.
- Can I reference another brand when ordering?
- Yes. The same size is also listed under Mitsuboshi 5V 900, Optibelt 5V 900 and Dayco 5V 900. You can use those part numbers as a reference when you request a quote.