SKF TKRT 25M tachometer
- Brand
- SKF
- Category
- Mounting and maintenance tools
- Subcategory
- Mounting and maintenance tools
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF TKRT 25M belongs to tachometer, part of our Mounting and maintenance tools range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for TKRT 25M and any equivalents.
The SKF TKRT is a handheld tachometer that reads revolutions per minute and surface speed, and it works in two ways: without touching the equipment by using a light beam, or in direct contact with the rotating part. Maintenance teams use it to check how motors, pumps, fans and transmissions are running, and to spot speed changes that point to a problem.
The code on these instruments starts with TKRT, followed by a number that identifies the range or the version, and ends with the letter M. TKRT 25M is one example from this SKF family. If you send us the complete part number when you ask for a quote, we can confirm which version it is and which accessories are included.
Typical users are plant maintenance crews, repair shops and field service technicians. The instrument suits speed checks on electric motors, centrifugal pumps, fans, compressors and drive lines. It is also handy after a swap or a start-up, when you need to confirm the running speed, and for catching RPM drops that may indicate overload, worn parts or a power supply issue.
Choosing a model comes down to two things: the speed range you need to cover and how you can reach the equipment. The no-contact method needs a reflective mark on the shaft or pulley, while the contact method calls for the correct adapter and tip. Keep the lens clean, make sure the reflective surface is in good shape, and fit the accessories as the manufacturer instructs.
Other brands offer tachometers that do similar jobs, but ranges and accessories are not always shared. What defines whether one unit can stand in for another is the measurement method, the range and how it mounts. Before replacing an existing tachometer, compare the technical data and check with your supplier.
To get a quote, send the TKRT part number from your equipment or its documentation to MR Industrial Accessories via WhatsApp or email. We can help you pick the variant that fits your measurements and suggest equivalents where they apply.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What is the difference between optical and contact mode?
- Optical mode reads speed from a distance using a reflective mark and a light beam. Contact mode needs a tip resting against the shaft or surface. Which one works better depends on access and on the measurement itself.
- Can it measure linear speed?
- Yes. With the correct accessories, the tachometer reads surface speed in meters per minute or feet per minute, which is useful for conveyor belts and continuous processes.
- How do I request a quote for the TKRT?
- Contact us via WhatsApp with the full model part number, such as TKRT 25M, and tell us what you plan to measure. We confirm the version and send the quote.