SKF 6220 M/C3 deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF 6220 M/C3
- 62Series
- Deep groove ball bearings, 62 series. Series differ in outside diameter and width even when the bore is the same.
- 20Bore
- Bore 100 mm (20 × 5).
- M/C3Suffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
6220 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF 6220 M/C3 measures 100 mm across the bore and 180 mm across the outside diameter; its width is 34 mm (100 x 180 x 34 mm).
SKF 6220 M/C3 belongs to deep groove ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6220 M/C3 and any equivalents.
SKF deep groove ball bearings in the 60 series are thin-section, single-row components built with a machined brass cage. They handle radial loads and combined loads where axial space is tight, and they run smoothly at moderate to high speeds in electric motors, pumps, fans and gearboxes.
Reading the part number is straightforward. The first two digits give the dimension series, here the 60 series. The following two digits are the bore code: in 6014, the 14 corresponds to a 70 mm bore. Suffixes M/C3 and M/C4 tell you the cage is machined brass and the radial internal clearance is above normal, which suits interference fits or elevated operating temperatures.
These bearings appear in low and medium power electric motors, centrifugal pumps, industrial fans, screw compressors, machine tools and speed reducers. Because they tolerate moderate radial and axial loads, they work well in belt or gear drives that need precise, low-maintenance shaft support.
When selecting a bearing, look at radial and axial load, speed and the operating environment. Choose C3 or C4 clearance if the shaft fit is an interference fit or if operating temperature goes above 100 °C. Mount with the correct tools and never strike the balls directly. Grease or oil lubrication is acceptable, and shaft-to-housing alignment must be maintained to prevent extra loads.
For equivalences, SKF deep groove ball bearings interchange with other brands that use the same ISO designation, such as FAG, NSK or NTN, provided tolerances and internal clearance match. Always check the cage suffix and clearance, because not every brand offers the same options. When replacing, compare the main dimensions and operating conditions first.
To get a quote for an SKF deep groove ball bearing, send the complete part number via WhatsApp or email. The team at MR Industrial Accessories can help you pick the right variant and suggest equivalents. The company also supplies other brands and manufactures split plummer block housings, roller chains and sheaves.
More SKF versions in the 6220 series
SKF lists these 6220 series versions in its catalogs, but they don't have a page on this site. Send us the part number of any of them and we'll find it and quote it.
- SKF 6220 N
- SKF 6220 NR
Dimensions
100 x 180 x 34 mm (d x D x B): boundary dimensions for basic designation 6220, according to ISO 15.
- Bore
- 100mm
- Outside diameter (D)
- 180mm
- Width (B)
- 34mm
Same size, other brands
Other brands' pages with basic designation 6220: 100 x 180 x 34 mm (d x D x B) per ISO 15.
What they share are the ISO 15 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- SKF 6220 M/C3 bearing: what are its dimensions?
- SKF 6220 M/C3 measures 100 mm across the bore and 180 mm across the outside diameter; its width is 34 mm (100 x 180 x 34 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation 6220.
- What does the M/C3 suffix mean on an SKF bearing?
- M stands for a machined brass cage, which handles vibration and high temperatures well. C3 means radial internal clearance is greater than normal, which is recommended for interference fits or when the shaft and housing run at different temperatures.
- How do I decide between C3 and C4 clearance?
- C4 clearance is larger than C3 and is used when temperatures are higher or fits are tighter. For typical conditions, C3 is usually enough. Share your equipment data and we can advise.
- Can I use another brand instead of SKF?
- Yes, if the ISO designation matches in dimensions and clearance. FAG, NSK and NTN offer equivalents. Check the cage type and internal clearance to confirm interchangeability.