SKF 6005-RSL deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF 6005-RSL
- 60Series
- Deep groove ball bearings, 60 series. Series differ in outside diameter and width even when the bore is the same.
- 05Bore
- Bore 25 mm (05 × 5).
- RSLSuffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
6005 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF 6005-RSL measures 25 mm across the bore and 47 mm across the outside diameter; its width is 12 mm (25 x 47 x 12 mm).
SKF 6005-RSL belongs to deep groove ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6005-RSL and any equivalents.
SKF deep groove ball bearings with the 2RSL suffix are low-friction sealed components that handle both radial and axial loads while keeping contaminants out. They suit equipment where low friction and long service life matter, such as electric motors, pumps and fans. MR Industrial Accessories supplies this line to customers across the United States and Latin America.
The SKF part numbering system tells you a lot at a glance. The base number covers the size and series, for example 6000 or 6200, while the 2RSL suffix means the bearing has low-friction seals on both sides. In codes like 6000-2RSL and 6200-2RSL, the digits set the dimensions and the suffix stays the same. Understanding this naming helps you identify the correct item quickly.
These bearings show up in many industries, from small electric motors to centrifugal pumps, fans, conveyor belts and agricultural machinery. The sealed design works well in areas with moderate dust or moisture, where you need to block particles without giving up speed. They are a dependable choice for equipment that runs continuously.
When choosing a bearing, consider the radial and axial loads, the rotation speed and the operating environment. The 2RSL seal keeps friction low, but if liquids or abrasive dust are present, a more robust seal may be better. During mounting, make sure alignment is precise and avoid impacts that could damage the seals. The bearing comes pre-lubricated, so adding grease is not required, but keep the area clean.
For equivalents, deep groove ball bearings with low-friction seals from other manufacturers can be swapped if dimensions and tolerances match. SKF is a globally recognized brand, and MR Industrial Accessories supplies it. Always verify the full code and technical data before replacing one bearing with another from a different maker.
If you need help selecting the right bearing, reach out. At MR Industrial Accessories we assist you in finding the best fit for your application. Send the code or dimensions via WhatsApp or email and we will respond promptly with a quote.
More SKF versions in the 6005 series
SKF lists these 6005 series versions in its catalogs, but they don't have a page on this site. Send us the part number of any of them and we'll find it and quote it.
- SKF 6005 N
Dimensions
25 x 47 x 12 mm (d x D x B): boundary dimensions for basic designation 6005, according to ISO 15.
- Bore
- 25mm
- Outside diameter (D)
- 47mm
- Width (B)
- 12mm
Same size, other brands
Other brands' pages with basic designation 6005: 25 x 47 x 12 mm (d x D x B) per ISO 15.
What they share are the ISO 15 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- SKF 6005-RSL bearing: what are its dimensions?
- SKF 6005-RSL measures 25 mm across the bore and 47 mm across the outside diameter; its width is 12 mm (25 x 47 x 12 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation 6005.
- What does the 2RSL suffix mean on an SKF bearing?
- The 2RSL suffix means the bearing has low-friction seals on both sides. These seals cut torque and block contaminants, which helps extend bearing life in applications where energy efficiency is important.
- Does this bearing come factory-lubricated?
- Yes, SKF bearings with the 2RSL suffix are supplied lubricated for life. You do not need to add grease during mounting, which simplifies maintenance and prevents over-lubrication errors.
- Can I replace a 2RSL bearing with a 2RS one?
- Often yes, but remember that the 2RS seal provides more protection against contaminants, though with higher friction. If your application needs low friction, the 2RSL is the better choice. Always check the operating conditions.