SKF 6006/32-2RS1/VB005 deep groove ball bearing

SKF 6006/32-2RS1/VB005 belongs to deep groove ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6006/32-2RS1/VB005 and any equivalents.

Sealed single row deep groove ball bearings from SKF's RS/VB line handle moderate radial and axial loads in machines where dust, moisture or grease loss would otherwise cut bearing life. Electric motors, pumps, fans and light transmissions are typical hosts. MR Industrial Accessories supplies this series and helps you match the exact variant to your shaft, housing and operating conditions.

Reading the code tells you most of what you need. Take 6006/32-2RS1/VB005: 6006 is the series and size, /32 signals a bore that differs from the standard one, 2RS1 means contact seals on both sides, and VB005 is an SKF-controlled variant. RS covers the sealed single row family, while VB flags executions with particular tolerances or internal clearances. Miss one of these suffixes and you may end up with a bearing that will not seat correctly on the shaft or in the housing.

These bearings show up in low and medium power motors, centrifugal pumps, fans, conveyor belts and machine tools. Food, textile, chemical and process plants rely on the seal to keep out dust, washdown water and vapors. Agricultural equipment and factory machines running on lifetime lubrication are also common hosts. The spread of sizes and executions makes them a flexible pick for maintenance work.

Selection starts with shaft and housing diameters, load type and the surrounding environment. The RS contact seal holds grease in place better than a ZZ shield but adds friction; for high-speed shafts, look at a lower-drag variant. Internal clearance and lubrication must suit the application, and bearings with different clearances should not share the same equipment. During mounting, align the raceways and use controlled-impact tools so the seals stay intact.

Equivalent nomenclatures exist across brands. An SKF 2RS1 often lines up with a 2RS or DDU from another maker, and VV with a non-contact seal. VB executions are trickier: not every one has a direct cross, so confirm tolerance, clearance and seal type before substituting. MR Industrial Accessories can point you to the equivalent based on the original part number and how the machine runs.

If you can read the number off the bearing or the equipment drawing, send it to MR Industrial Accessories via WhatsApp. That is enough to identify the series, seal and VB execution, and to propose the option that fits your machine. We support maintenance and replacement needs for plants across the United States and in several Latin American countries.