SKF 6000-ZTN9/C3LT deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF 6000-ZTN9/C3LT
- 60Series
- Deep groove ball bearings, 60 series. Series differ in outside diameter and width even when the bore is the same.
- 00Bore
- Bore 10 mm: by standard, 00 designates 10 mm.
- ZTN9/C3LTSuffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
6000 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF 6000-ZTN9/C3LT measures 10 mm across the bore and 26 mm across the outside diameter; its width is 8 mm (10 x 26 x 8 mm).
SKF 6000-ZTN9/C3LT belongs to deep groove ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6000-ZTN9/C3LT and any equivalents.
For rotating shafts that need a sealed, single-row ball bearing, the SKF ZTN/C LT series handles moderate radial and axial loads while keeping lubricant in and contaminants out. Typical applications include electric motors, pumps, fans and light transmissions. MR supplies this SKF line to customers in the US and Latin America. To get a quote, send the part number by WhatsApp or email and the team will reply promptly, suggest equivalents and help you choose.
Reading the code helps you order correctly. The base number gives bore diameter and section. ZTN identifies the seal used in this series. C3LT means radial clearance above standard (C3) plus long-life lubrication (LT). So a code like 6000-ZTN9/C3LT breaks down as: 6000 series, ZTN seal, C3 clearance, LT grease.
These bearings suit equipment where noise and maintenance should stay low: low- and medium-power electric motors, centrifugal pumps, fans, small compressors, machine tools and transmission units, as well as automotive and appliance applications. The seal makes them a fit for dusty or moderately humid environments when mounting and lubrication are done properly.
Selection depends on radial and axial load, speed and operating conditions. Choose C3 clearance when fits are interference or thermal gradients exist. The ZTN seal blocks contaminants, so keep housing and shaft clean and free of burrs. During mounting, apply force to the correct ring and avoid direct blows. Shaft-to-housing alignment matters to prevent extra loads and extend service life.
For replacements, deep groove ball bearings with special seals and clearance come from various brands under their own codes. The reliable method is to compare bore, outer diameter and width, along with sealing and clearance. Do not trust the code alone; it can differ between manufacturers. MR can help you identify the right reference.
To request a quote, send the full part number, for example 6000-ZTN9/C3LT, or your application measurements and characteristics on WhatsApp. The technical team reviews the inquiry and replies with the matching reference.
Dimensions
10 x 26 x 8 mm (d x D x B): boundary dimensions for basic designation 6000, according to ISO 15.
- Bore
- 10mm
- Outside diameter (D)
- 26mm
- Width (B)
- 8mm
Same size, other brands
Other brands' pages with basic designation 6000: 10 x 26 x 8 mm (d x D x B) per ISO 15.
What they share are the ISO 15 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- SKF 6000-ZTN9/C3LT bearing: what are its dimensions?
- SKF 6000-ZTN9/C3LT measures 10 mm across the bore and 26 mm across the outside diameter; its width is 8 mm (10 x 26 x 8 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation 6000.
- What does C3LT mean on this bearing?
- C3 is an internal radial clearance greater than standard, used for interference fits or high temperatures. LT is long-life lubrication. Together they define a bearing for demanding use with less maintenance.
- Does the ZTN seal cover both sides?
- ZTN refers to an integrated seal that can be on one or both sides depending on the variant. To confirm the exact configuration for the part number you need, ask on WhatsApp and we will advise.
- Can I replace another brand's bearing with this SKF one?
- Compare bore, outer diameter, width, clearance and sealing. Codes vary by manufacturer, but if measurements and specifications match, replacement is possible. If unsure, send the data and we will help.