FAG 6000-C-2HRS deep groove ball bearing
- Brand
- FAG
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding FAG 6000-C-2HRS
- 60Series
- Deep groove ball bearings, 60 series. Series differ in outside diameter and width even when the bore is the same.
- 00Bore
- Bore 10 mm: by standard, 00 designates 10 mm.
- C-2HRSSuffix
- FAG suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
6000 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
FAG 6000-C-2HRS measures 10 mm across the bore and 26 mm across the outside diameter; its width is 8 mm (10 x 26 x 8 mm).
FAG 6000-C-2HRS belongs to deep groove ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6000-C-2HRS and any equivalents.
FAG -C-2HRS deep groove ball bearings are built with contact seals on both sides and a steel sheet cage, making them a common choice for rotating shafts that must handle radial and axial loads in dusty or damp settings. They keep lubrication in and contaminants out, and are found in electric motors, pumps, fans and light-duty transmissions. MR Industrial Accessories supplies this line and assists with part selection.
Reading the part number helps you identify the exact variant. The base number gives the size and series: 629 belongs to the 62 series, while 6000, 6001, 6002, 6004, 6005, 6006 and 6007 are from the 60 series with a thin cross-section. The letter C means a steel sheet cage, which suits continuous operation. The 2HRS suffix signals contact sealing on both sides. Without that suffix, the sealing arrangement may be different.
These bearings are used in low and medium power electric motors, centrifugal pumps, fans, light conveyor belts, machine tools and packaging equipment. They also appear in agro-industrial machinery and maintenance workshops where bearings are replaced due to wear. The double seal and steel sheet cage make them appropriate for areas with dust, fine chips or moderate humidity, provided the operating temperature is compatible with the seal elastomer.
Selection depends on radial and axial load, rotation speed and shaft diameter. Because 2HRS seals add friction, a shielded bearing may be better at high speeds. Check housing alignment and the fit on the shaft and in the housing: forced mounting can damage the seals and reduce service life. Lubrication is built in and does not require replenishment in normal service; for very aggressive environments, consider extra sealing or a split plummer block housing.
Cross-brand interchange is based on the designation system. A 60 series bearing with double sealing from another manufacturer can be swapped if dimensions and sealing type match. The base number alone is not enough: cage, sealing and tolerance must be compared. MR Industrial Accessories helps you find the right replacement. If you have the original part number, we can cross-reference it with the FAG line we supply.
To request a quote, send the complete part number from the bearing or drawing via WhatsApp or email. With that information we identify the exact variant in the -C-2HRS series and reply promptly. If the suffix is unclear, a photo of the part or the shaft and housing dimensions help confirm it. MR Industrial Accessories serves customers across the United States and in several Latin American countries.
Dimensions
10 x 26 x 8 mm (d x D x B): boundary dimensions for basic designation 6000, according to ISO 15.
- Bore
- 10mm
- Outside diameter (D)
- 26mm
- Width (B)
- 8mm
SKF and other brands, same size
Other brands' pages with basic designation 6000: 10 x 26 x 8 mm (d x D x B) per ISO 15.
- Need the SKF 6000? We can also quote:6000-2RSH6000-2RSL6000-2RSH/C320 more →
- KOYO6000
- NSK6000
- RKB6000
- TIMKEN60006000M
What they share are the ISO 15 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- FAG 6000-C-2HRS bearing: what are its dimensions?
- FAG 6000-C-2HRS measures 10 mm across the bore and 26 mm across the outside diameter; its width is 8 mm (10 x 26 x 8 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation 6000.
- What does the 2HRS suffix indicate on a FAG bearing?
- It means contact seals on both sides. These seals keep the built-in lubricant in and block dust or moisture from entering, so the bearing works well in contaminated environments. Unlike a shield, the seal rubs and adds some rotational resistance.
- How do I request a quote for a bearing from this series?
- Send us the complete part number shown on the part or drawing via WhatsApp or email. If you do not have it, provide the shaft and housing dimensions or a photo. We will identify the variant and reply promptly.
- Can I replace a bearing from another brand with a FAG one from the -C-2HRS series?
- Yes, if the main dimensions and sealing type match. The base number alone is not enough: cage, sealing and tolerance must be compared. Send us the original part number and we will help you find the equivalent in the FAG line we supply.