SKF 6000-ZTN9 deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF 6000-ZTN9
- 60Series
- Deep groove ball bearings, 60 series. Series differ in outside diameter and width even when the bore is the same.
- 00Bore
- Bore 10 mm: by standard, 00 designates 10 mm.
- ZTN9Suffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
6000 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF 6000-ZTN9 measures 10 mm across the bore and 26 mm across the outside diameter; its width is 8 mm (10 x 26 x 8 mm).
SKF 6000-ZTN9 belongs to deep groove ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6000-ZTN9 and any equivalents.
SKF ZTN deep groove ball bearings are single-row components that feature metal shields on both sides. They suit moderate-speed applications with combined loads where keeping lubricant in and particles out matters. Common in industrial machinery, power tools, and general equipment, these bearings are available through MR Industrial Accessories, where we help you match the right part number to your application.
The part number tells you the size and protection details. The base number covers bore and section, while suffixes define shielding and cage. For instance, 6000-ZTN9, 6002-ZTN9, 6201-ZTN9, and 6202-ZTN9 all share the ZTN9 suffix: Z means metal shields on both sides, and TN9 indicates a fiberglass-reinforced polyamide cage. This setup is typical for small and medium cross-section bearings.
You will find these bearings in small electric motors, fans, centrifugal pumps, light reducers, power tools, and transmission systems. They handle dusty or moderately humid conditions by protecting the lubricant, which helps extend service life without external lubrication. However, Z shields are not hermetic; for liquids or fine contaminants, consider a contact seal.
Selection depends on shaft diameter, load type (radial, axial, or combined), and the environment. Proper mounting with the right tools, avoiding impacts on the rings, and ensuring alignment between shaft and housing are critical. Factory lubrication typically lasts for the bearing's normal service life.
When replacing, deep groove ball bearings with shields from different brands may have similar designations, but suffixes vary. There is no universal cross-reference because each manufacturer uses its own letters for cage, clearance, and protection. The safest approach is to compare main dimensions and execution type, and consult a specialist if the part number does not match exactly.
To get a quote or advice, send the complete part number via WhatsApp to MR Industrial Accessories. We also manufacture split plummer block housings, roller chains, and sheaves, so we can support various plant needs.
Dimensions
10 x 26 x 8 mm (d x D x B): boundary dimensions for basic designation 6000, according to ISO 15.
- Bore
- 10mm
- Outside diameter (D)
- 26mm
- Width (B)
- 8mm
Same size, other brands
Other brands' pages with basic designation 6000: 10 x 26 x 8 mm (d x D x B) per ISO 15.
What they share are the ISO 15 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- SKF 6000-ZTN9 bearing: what are its dimensions?
- SKF 6000-ZTN9 measures 10 mm across the bore and 26 mm across the outside diameter; its width is 8 mm (10 x 26 x 8 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation 6000.
- What does the ZTN9 suffix mean on an SKF bearing?
- Z stands for metal shields on both sides. TN9 refers to a fiberglass-reinforced polyamide cage. This combination is common in small and medium section deep groove ball bearings.
- Where are ZTN shield deep groove ball bearings used?
- They are used in electric motors, fans, pumps, power tools, and transmission equipment. They work well in dusty or moderately humid environments where lubricant protection is needed, but they are not hermetic seals.
- How do I request a quote for these bearings?
- Send the full bearing part number, such as 6202-ZTN9, and the quantity you need via WhatsApp. We will reply with a quote and alternatives. We can also help if you have questions about the designation.