V-belt Optibelt X17 x 1840
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- Super TX M=S
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT X17 x 1840 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for X17 x 1840 and any equivalents.
When you need to match a belt on a drive, the marking on the old belt is the starting point. This Optibelt Super TX M=S belt carries the code X17 x 1840 and is a cogged classical V-belt with a BX profile and an 1840 mm length. We carry it for maintenance and replacement work.
To confirm the match, compare the existing belt's back marking with the code X17 x 1840. Check that the profile reads BX and that the length is listed as 1840 mm. If the old belt is worn or the marking is unreadable, measure the length along the belt's path and confirm the cross-section against the pulley groove.
This is a cogged classical V-belt from the Optibelt Super TX M=S series. The cogged construction is typical for drives where the belt must run over smaller pulleys. The BX profile and 1840 mm length are the two key dimensions to verify before ordering.
Send the part number X17 x 1840 by WhatsApp or email and our team will confirm the belt or suggest an equivalent. If you are replacing more than one belt on the same drive, include the quantity and the other belt markings so we can help you match the set.
Dimensions
- Section
- BX
- Length
- 1840mm
Frequently asked questions
- What part number should I send for a quote?
- Send the code X17 x 1840. You can also include the brand and series, Optibelt Super TX M=S, along with the BX profile and 1840 mm length.
- How do I confirm this belt matches the one being replaced?
- Compare the marking on the back of the old belt with X17 x 1840. Confirm the profile is BX and the length is 1840 mm. If the marking is gone, measure the belt path and check the pulley groove.
- Can you help if the old belt marking is worn off?
- Yes. Send the drive details and any remaining marking. Our team will help confirm the right belt or suggest an equivalent based on the BX profile and 1840 mm length.