V-belt Optibelt X13 x 1330
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- Super TX M=S
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT X13 x 1330 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for X13 x 1330 and any equivalents.
The Optibelt Super TX M=S X13 x 1330 is a cogged classical V-belt with an AX profile and a 1330 mm length. Before you fit it, inspect the drive and sheaves so the new belt runs true and wears evenly.
Check sheave grooves for wear, rust, or embedded debris. A worn groove lets the belt sit too deep and slip. Verify sheave alignment with a straightedge or laser, and confirm that the driven and driving shafts turn freely without bearing play. Look for oil or grease on the drive; clean it off before fitting the belt.
Measure the old belt along its back, or read the marking on the back of the belt, and compare it with the X13 x 1330. Confirm the profile matches AX. If the drive uses multiple belts, replace them as a set so the load stays shared evenly. Tension the new belt to the drive manufacturer's specification, then recheck after the first hours of running.
To request a quote, send the part number X13 x 1330, the quantity, and a photo of the belt marking if you have one. Our team replies by WhatsApp or email and can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- AX
- Length
- 1330mm
Frequently asked questions
- What should I check before fitting this belt?
- Inspect the sheaves for groove wear, rust, and debris, check alignment and shaft play, and remove any oil or grease from the drive. These steps help the X13 x 1330 cogged classical V-belt run correctly.
- How do I confirm the belt matches my drive?
- Read the marking on the back of the old belt and compare the profile and length with the AX profile and 1330 mm length of the X13 x 1330. If you are unsure, send us a photo of the marking.
- How do I request a quote?
- Send the part number X13 x 1330 and the quantity by WhatsApp or email. The team replies promptly and can help confirm the right belt or suggest an equivalent.