V-belt Optibelt X13 x 1380

OPTIBELT X13 x 1380 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for X13 x 1380 and any equivalents.

This Optibelt Super TX M=S belt is a cogged classical V-belt in the AX profile with a 1380 mm length. The profile sets the cross-section that must match your sheave groove, and the length sets the belt's path around the drive. Use both numbers when checking a replacement against the belt you are removing.

The AX profile is the classical V-belt cross-section for this belt, and the cogged construction is the molded notch pattern on the underside. The code X13 x 1380 pairs that profile with a 1380 mm length. If the marking on the back of the old belt reads AX and 1380 mm, this is the same size to quote.

On a drive check, confirm the sheave groove accepts an AX cross-section and measure the old belt's length before ordering. A belt that is too short will not seat, and one that is too long will not tension correctly. Inspect sheaves for wear, alignment and debris at the same time.

We carry the Optibelt Super TX M=S line and quote by part number. Send the code X13 x 1380, or the AX and 1380 mm markings from your old belt, by WhatsApp or email. If you are unsure of the profile, a photo of the belt back and the sheave groove helps us confirm the right belt.