V-belt Optibelt X13 x 1280
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- Super TX M=S
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT X13 x 1280 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for X13 x 1280 and any equivalents.
This Optibelt Super TX M=S belt is a cogged classical V-belt with an AX profile and a 1280 mm length. Cogged classical belts are commonly used on industrial drives where a standard wrapped belt runs hot or slips, such as fans, pumps, compressors and machine tools. Confirm fit by matching the profile and length to the belt you are replacing.
The marking on the back of the old belt is the fastest way to confirm what you need. Look for the profile and the length, then compare them with the AX profile and 1280 mm length of this Optibelt X13 x 1280 Super TX M=S. If the marking is worn or unreadable, measure the outside length and check the cross-section against the pulley groove.
Cogged classical V-belts are used on drives that need flexibility around small pulleys and better heat dissipation than a wrapped belt. Typical industrial uses include ventilation, water treatment, conveying and general machinery where an AX profile belt is specified. Before ordering, inspect the pulleys for wear, misalignment and oil or debris, and replace belts in sets when the drive uses more than one.
Dimensions
- Section
- AX
- Length
- 1280mm
Frequently asked questions
- How do I confirm that this Optibelt X13 x 1280 belt fits my drive?
- Check the marking on the belt you are replacing. It should show the AX profile and a 1280 mm length. If the marking is gone, measure the outside length and compare the cross-section to the pulley groove.
- Where is this type of cogged classical V-belt used?
- Cogged classical V-belts are used on industrial drives such as fans, pumps, compressors and machine tools. They run cooler and flex more easily around small pulleys than wrapped belts.
- What should I send to get a quote for this belt?
- Send the part number X13 x 1280, or the profile and length from the old belt, by WhatsApp or email. The team will confirm the belt or suggest an equivalent.