V-belt Optibelt SPZ 2000

OPTIBELT SPZ 2000 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 2000 and any equivalents.

The Optibelt SPZ 2000 is a narrow wedge V-belt in the SPZ profile with a 2000 mm length. For a maintenance or purchasing professional, the profile and length are the two values that decide whether the belt fits the drive. The 9.7 mm top width, 8 mm height and 40° angle complete the dimensional picture.

Profile and length work together as the primary selection data. SPZ is the narrow wedge profile, and 2000 mm is the datum length for this belt. If the drive is built around an SPZ section, the 2000 mm length is what you match to the original belt or to the drive's required center distance. The same size is also listed under Stark SPZ 2000, which gives you a second reference when you are comparing what is on the shelf or in the manuals.

The remaining dimensions are worth confirming before you order: 9.7 mm top width, 8 mm height and a 40° angle. These are the values that tell you the belt will sit correctly in the pulley groove. A belt with the right length but the wrong profile will not run properly, so check the profile marking and the length together rather than either one alone.

To request a quote, send the part number Optibelt SPZ 2000, or the marking from the back of the old belt. If the belt is worn or the marking is unreadable, measure the top width and the length and include those numbers. We carry this belt and can help confirm the right SPZ 2000 for your drive.