V-belt Optibelt SPZ 1987 RP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Red Power 3 S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPZ 1987 RP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1987 RP and any equivalents.
This Optibelt SPZ 1987 RP belt is a narrow wedge V-belt from the Red Power 3 S=C Plus series. It is used in industrial drives where a compact, high-capacity belt is required. To confirm fit, match the profile and length exactly and check the marking on the old belt.
The SPZ profile is a narrow wedge section. This belt has a top width of 9.7 mm, a height of 8 mm and a 40° angle. The datum length is 1987 mm. These dimensions are the primary fit criteria for any drive that specifies an SPZ section belt of this length.
When replacing, read the marking on the back of the old belt. It should show the profile and length. If the marking is worn or missing, measure the old belt and compare it to the values above. The Red Power 3 S=C Plus series is a specific Optibelt line, so confirm that the replacement matches the series if the drive was originally set up with it.
For a quote, send the part number SPZ 1987 RP, the quantity needed and any details from the old belt. If you are unsure, include a photo of the marking and the drive. The team can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- SPZ
- Length
- 1987mm
Frequently asked questions
- What does the SPZ profile mean for fit?
- SPZ is a narrow wedge V-belt profile. This belt has a 9.7 mm top width, 8 mm height and 40° angle. The drive pulley groove must be made for the SPZ section.
- How do I confirm the length?
- The datum length is 1987 mm. Check the marking on the back of the old belt. If it is not readable, measure the old belt and compare it to 1987 mm.
- What should I send for a quote?
- Send the part number SPZ 1987 RP, the quantity you need and any photos of the old belt marking or the drive. The team will reply promptly.