V-belt Optibelt SPZ 1950
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- SK S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPZ 1950 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1950 and any equivalents.
This Optibelt SPZ 1950 belt is a narrow wedge V-belt from the SK S=C Plus series. It is used in industrial drives where an SPZ profile and a 1950 mm length are specified. To match it to the belt being replaced, compare the profile and length marked on the old belt.
The SPZ profile has a top width of 9.7 mm, a height of 8 mm and a 40° angle. The length is 1950 mm. These dimensions identify the belt size. Check the marking on the back of the belt you are replacing: it should show the profile and length. If it reads SPZ 1950, this belt matches that size.
If the old belt is worn or the marking is unreadable, measure the top width and the outside length to confirm the profile and length. A belt with a different profile or length will not fit the same drive. When you request a quote, send the part number SPZ 1950 or the profile and length you measured.
We carry the Optibelt SPZ 1950 SK S=C Plus narrow wedge V-belt. For a quote, contact us by WhatsApp or email with the part number and the quantity you need. If you are unsure of the size, send the marking from the old belt or your measurements and we will help confirm the right belt.
Dimensions
- Section
- SPZ
- Length
- 1950mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Compare the profile and length marked on the old belt. This belt is SPZ profile with a length of 1950 mm. If the old belt shows SPZ 1950, it is the same size.
- What if the marking on my old belt is no longer readable?
- Measure the top width and the outside length of the old belt. This belt has a top width of 9.7 mm and a length of 1950 mm. Send those measurements with your request and we will help confirm the right belt.
- What information should I send to request a quote?
- Send the part number SPZ 1950, or the profile and length you measured, along with the quantity you need. We will reply promptly by WhatsApp or email.