V-belt Optibelt C 214
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- VB
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT C 214 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 214 and any equivalents.
This is an Optibelt VB classical V-belt in profile C, with a length of 5537 mm. It is used on drives that call for a classical V-belt rather than a narrow wedge or synchronous belt. Confirm fit by the profile and the length marked on the belt.
The belt measures 22 mm across the top, 14 mm high, and has a 40° angle. These dimensions match the C profile, so the belt seats correctly in a C-section pulley groove. The same size is also listed under Gates C 214. When you compare a belt on the drive, check that the section and the length agree with what is stamped on the old belt.
Classical V-belts like this one are used on general industrial drives where a C-section belt is specified. To confirm the replacement, read the marking on the back of the old belt and match the profile and length. If the marking is worn or missing, measure the outside length and the top width, and note the pulley groove width.
For a quote, send the part number Optibelt VB C 214, or the profile and length. If you are unsure of the exact belt, send a photo of the marking and the pulley groove. We can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- C
- Length
- 5537mm
Frequently asked questions
- How do I confirm this C 214 belt fits my drive?
- Check that the drive uses a C-section pulley groove and that the belt length matches. The belt is 5537 mm long, 22 mm top width, 14 mm high, with a 40° angle. Compare these with the marking on the old belt or with the pulley dimensions.
- What information do you need to quote this belt?
- Send the part number Optibelt VB C 214, or the profile and length. If the belt is not marked, send the top width, height and outside length, plus a photo of the pulley groove if possible.
- Can you help if I cannot read the old belt marking?
- Yes. Send a photo of the belt and the drive, and the dimensions you can measure. We can help confirm the right belt or suggest an equivalent based on the profile and length.