V-belt Optibelt C 210
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- VB
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and OPTIBELT: matching part numbers →OPTIBELT and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT C 210 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 210 and any equivalents.
This Optibelt C 210 is a classical V-belt in profile C with a length of 5436 mm. It is used on driven equipment where a standard C-section belt is specified, such as pumps, fans, compressors and other industrial drives. Confirm fit by matching the profile and length to the old belt and the drive sheave groove.
The C profile is a classical V-belt section with a 22 mm top width, 14 mm height and a 40° angle. These belts are common on lower-speed, higher-torque drives where the sheave grooves are cut for a classical section rather than a narrow wedge. The 5436 mm length is the datum length for this belt, so it must match the drive's required belt length.
To confirm fit, read the marking on the back of the old belt and compare it to the profile and length above. Check that the sheave grooves are clean and free of wear, and that the belt sits correctly in the groove without bottoming out. If the old belt is stretched, cracked or glazed, replace it and inspect the other belts on the same drive.
The same size is also listed under Stark C 210. Send the part number, the belt marking and a photo of the drive if you need help confirming the right belt. We carry Optibelt belts and can help match the profile and length to your application.
Dimensions
- Section
- C
- Length
- 5436mm
Frequently asked questions
- How do I confirm this C 210 belt fits my drive?
- Check the old belt marking for profile C and a 5436 mm length. Measure the top width and height if the marking is worn: 22 mm top width and 14 mm height. Also confirm the sheave groove is a C-section groove.
- What information should I send for a quote?
- Send the part number Optibelt C 210, the belt marking from the back of the old belt, and the drive or equipment details. A photo of the belt and sheave helps confirm the profile and length.
- Is this belt the same as Stark C 210?
- The same size is also listed under Stark C 210. Profile and length are the key matching points: C profile and 5436 mm.