V-belt Optibelt BCP 648

OPTIBELT BCP 648 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BCP 648 and any equivalents.

The Optibelt BCP 648 is a classical V-belt from the Conveyor Power series, supplied in profile B with a length of 16535 mm. Before you fit it, check the drive and sheaves so the new belt runs true and wears evenly.

Inspect sheave grooves for wear, ridges or embedded debris, and confirm the grooves match the belt's profile B and 40-degree angle. A worn or misaligned sheave will shorten belt life and cause slippage regardless of the belt's condition. Check alignment with a straightedge across both sheaves, and correct any offset or angular misalignment before tensioning.

The BCP 648 measures 17 mm across the top and 11 mm in height, with a length of 16535 mm. Verify the old belt's marking against these dimensions and confirm the replacement follows the same routing through all idlers and guards. When a drive uses multiple belts, replace the full set so the load is shared evenly and each belt carries its share.

For a quote, send the part number BCP 648, the quantity, and the drive details. If you are unsure whether this profile and length suit your application, include a photo of the belt marking and the sheave arrangement, and the team can confirm the right belt or suggest an equivalent.