V-belt Optibelt BCP 632
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Conveyor Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT BCP 632 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BCP 632 and any equivalents.
The Optibelt BCP 632 is a classical V-belt in the Conveyor Power series. It has a B profile, a 40 degree angle, a top width of 17 mm, a height of 11 mm, and a length of 16129 mm. This page covers how to read the marking on your old belt so the replacement matches the drive.
The marking on the back of a worn belt is the most reliable starting point. Read it before the belt is removed, since the print can wear away or become hard to read once the belt is off the drive. Write down the full code and any profile and length figures shown alongside it. For this belt, the marking identifies the Optibelt BCP 632 in the Conveyor Power series.
Compare what you read against the belt itself. A B profile belt should measure 17 mm across the top and 11 mm in height, with a 40 degree angle. The length should correspond to 16129 mm. If the marking is gone, measure the old belt and note the profile and length, then send those figures with the part number.
Send the part number, the profile, and the length to our team by WhatsApp or email to request a quote. If the marking is unclear, send a photo of the belt and the drive nameplate. We can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- B
- Length
- 16129mm
Frequently asked questions
- What should I look for on the old belt?
- Read the marking printed on the back of the belt. Note the full part number, the profile, and the length. For this belt, the marking should read Optibelt BCP 632, with a B profile and a length of 16129 mm.
- What if the marking on the belt is worn off?
- Measure the old belt instead. Check the top width, height, and outside length, and note the profile. Send those measurements with any drive details to our team, and we can help confirm the right belt.
- How do I request a quote for this belt?
- Send the part number Optibelt BCP 632 by WhatsApp or email. Include the profile and length if you have them, or a photo of the old belt and the drive nameplate. Our team replies promptly.