V-belt Optibelt BCP 465
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Conveyor Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT BCP 465 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BCP 465 and any equivalents.
The Optibelt BCP 465 is a Conveyor Power classical V-belt in profile B. It measures 11887 mm in length, with a top width of 17 mm and a height of 11 mm, and a 40° angle. This page gives you the details needed to match it to the belt you are replacing.
When matching a replacement, the marking on the old belt is your starting point. Confirm the profile is B, then verify the length against 11887 mm. The cross-section dimensions also help: a top width of 17 mm and a height of 11 mm. If the old belt is worn or the marking is unreadable, measure the outside length and the top width with a caliper, and compare those figures directly to the values above.
The 40° angle is part of the belt's construction and should match the pulley groove it runs in. Check the pulleys for wear, cracks or debris before installing a new belt. On a long center distance like this, alignment matters: verify that the shafts are parallel and the pulleys are in line so the belt tracks correctly and wears evenly.
For a quote, send the part number BCP 465, the profile B, and the length 11887 mm, along with the quantity you need. If you are replacing more than one belt on the same drive, include the number of belts so the set can be matched. You can send this by WhatsApp or email, and the team will confirm the belt or suggest an equivalent.
Dimensions
- Section
- B
- Length
- 11887mm
Frequently asked questions
- How do I confirm the Optibelt BCP 465 is the right belt for my drive?
- Check the marking on the belt you are replacing. The profile should be B, the length 11887 mm, the top width 17 mm, and the height 11 mm. If the marking is worn, measure the old belt and compare those dimensions.
- What should I inspect before installing a replacement?
- Inspect the pulleys for wear, cracks or buildup, and check that the shafts are aligned. The belt has a 40° angle, so the pulley grooves should be in good condition to match it.
- What information do I need to send for a quote?
- Send the part number BCP 465, the profile B, the length 11887 mm, and the quantity. If the drive uses multiple belts, include the number so the set can be matched. You can send this by WhatsApp or email.