V-belt Optibelt BCP 460

OPTIBELT BCP 460 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BCP 460 and any equivalents.

The Optibelt BCP 460 is a Conveyor Power classical V-belt with a B profile and a length of 11760 mm. It measures 17 mm across the top and 11 mm in height, with a 40-degree angle. Use these figures to match it to the belt you are replacing.

The surest way to match a belt is to read the marking on its back and compare it with the data here: profile B, length 11760 mm, top width 17 mm, height 11 mm, angle 40 degrees. If the old belt is worn or the marking is gone, measure the length and the cross-section and check them against the same values.

The BCP 460 is a classical V-belt in the Conveyor Power series. It is not a narrow wedge belt or a cogged belt, so confirm that the drive was set up for a classical B profile before ordering. The 40-degree angle and the 17 mm by 11 mm section are the points to verify against the pulley groove.

Send the part number BCP 460, or the profile and length from your old belt, by WhatsApp or email. We carry Optibelt belts and can confirm the right belt or suggest an equivalent. A photo of the back marking and of the drive helps us check the details before we reply.