V-belt Optibelt BCP 458
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Conveyor Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT BCP 458 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BCP 458 and any equivalents.
The Optibelt BCP 458 is a classical V-belt in the Conveyor Power series, built for drives that use a profile B cross-section. Before you order, match the marking on the belt you are replacing: profile B, 11709 mm length, 17 mm top width, 11 mm height, 40 degree angle. Send that part number and we will confirm it or suggest an equivalent.
Matching starts with the belt on the machine. Read the back of the old belt and compare it to the Optibelt BCP 458 data: profile B, 11709 mm length, 17 mm top width, 11 mm height and a 40 degree angle. If the old belt is worn or the marking is gone, measure the outside length and the top width, then send those numbers along with the drive details.
A classical V-belt like this one is selected by profile and length, so a belt that looks close but differs in either dimension will not sit correctly in the pulley groove. Confirm the profile is B and the length is 11709 mm before ordering. If you are unsure, send a photo of the belt marking and the pulley groove.
When you request a quote, include the part number BCP 458, the profile, the length, and the quantity you need. If you are replacing a set, note how many belts run on the drive so we can quote the full set. We carry Optibelt and can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- B
- Length
- 11709mm
Frequently asked questions
- How do I confirm the Optibelt BCP 458 is the right belt for my drive?
- Check the marking on the belt being replaced. The Optibelt BCP 458 is a profile B classical V-belt with a length of 11709 mm, a top width of 17 mm, a height of 11 mm and a 40 degree angle. If those match, it is the correct size.
- What should I send to request a quote?
- Send the part number BCP 458, the profile B, the 11709 mm length, and the quantity. If you are replacing a set, include the number of belts on the drive.
- Can you suggest an equivalent if the BCP 458 is not what I need?
- Yes. Send the dimensions and the marking from your old belt. We can help confirm the right belt or suggest an equivalent based on profile and length.