V-belt Optibelt BCP 215

OPTIBELT BCP 215 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BCP 215 and any equivalents.

The Optibelt BCP 215 is a classical V-belt from the Conveyor Power series, built for industrial drives that need a reliable, long-lasting belt. With a B profile and a 5537 mm length, it fits specific drive layouts where the original belt has worn or failed. Before you install it, take a few minutes to inspect the drive and sheaves.

A new belt on a worn or misaligned drive will not last. Check the sheave grooves for wear, rust, or embedded debris, and confirm that the sheaves are aligned and free of wobble. Look for oil or grease contamination around the drive, and verify that the take-up adjustment has enough travel to tension the belt correctly. If the old belt failed early, the sheaves are often the cause.

The BCP 215 has a top width of 17 mm, a height of 11 mm, and a 40-degree angle. Its B profile and 5537 mm length make it a direct replacement when the original marking matches. If you are replacing a set, fit all belts at the same time so the load is shared evenly. Mixed belts can cause vibration and premature failure.

To request a quote, send the part number BCP 215, the quantity, and any details from the back of the old belt. Our team can confirm the profile and length and help you find the right belt for your drive. Contact us by WhatsApp or email.

When you receive the belt, store it in a cool, dry place away from direct sunlight and ozone sources. Do not bend it sharply or hang it on a small hook, as this can damage the tensile cords. Install it with the correct tension and recheck after the first few hours of operation.