V-belt Optibelt BCP 232
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Conveyor Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT BCP 232 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BCP 232 and any equivalents.
The Optibelt BCP 232 is a classical V-belt from the Conveyor Power series. It has a B profile, a length of 5969 mm, a top width of 17 mm, a height of 11 mm, and a 40-degree angle.
Before fitting this belt, inspect the drive and sheaves. Check sheave grooves for wear, cracks, or embedded debris, and confirm they are aligned. Worn or misaligned sheaves can shorten belt life and cause vibration or slipping.
Verify that the new belt matches the old one. The Optibelt BCP 232 has a B profile and a 5969 mm length. Compare the marking on the back of the old belt with these figures. If the old belt is worn or stretched, measure the drive to confirm the required length.
When replacing multiple belts on a drive, install a matched set. Mixed belts can lead to uneven tension and premature failure. After installation, check tension according to the drive manufacturer's instructions and recheck after the first hours of operation.
Dimensions
- Section
- B
- Length
- 5969mm
Frequently asked questions
- What are the dimensions of the Optibelt BCP 232?
- It has a B profile, a length of 5969 mm, a top width of 17 mm, a height of 11 mm, and a 40-degree angle.
- How do I confirm this is the correct belt for my drive?
- Compare the profile and length with the marking on your old belt. The Optibelt BCP 232 is a B-profile belt with a 5969 mm length.
- What should I check before installing a new belt?
- Inspect the sheaves for wear, alignment, and debris. Confirm the new belt matches the old one in profile and length, and follow the drive manufacturer's tensioning procedure.