V-belt Optibelt BCP 210

OPTIBELT BCP 210 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BCP 210 and any equivalents.

The Optibelt BCP 210 is a Conveyor Power classical V-belt with a B profile and a length of 5410 mm. The profile and length are the two dimensions that determine whether this belt will seat and run correctly on your drive.

The B profile gives this belt a 17 mm top width and an 11 mm height, with a 40-degree angle. Those dimensions must match the groove of the pulley. A belt with the wrong profile will not sit at the correct depth in the groove, so check the profile marking on the old belt or measure the top width before you order.

The 5410 mm length is the datum you need when the replacement must fit the same center distance and take-up range. If the old belt is worn or stretched, measure the drive rather than relying on the belt alone. Send the part number BCP 210 and the application details, and we will confirm the belt or suggest an equivalent.

For drives that run more than one belt, replace the full set at the same time so the load stays shared evenly. Inspect the pulleys for wear, alignment and debris while the belts are off. If you are unsure of the profile or length, send a photo of the marking on the back of the belt.