Timing belt Optibelt 5MHP 965
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega HP
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 5MHP 965 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5MHP 965 and any equivalents.
The Optibelt 5MHP 965 is an Omega HP timing belt with an HTD 5M profile, a 965 mm length and a 5 mm pitch. Before you fit it, inspect the drive so the new belt runs true from the start.
Check the sheaves for worn grooves, burrs or debris, and confirm they are aligned and securely mounted. Measure the center distance and verify the take-up range so the belt can be tensioned to the drive manufacturer's specification. If the old belt failed early, look for a seized bearing, a misaligned shaft or a damaged sprocket before installing the replacement.
The 5MHP 965 is a timing belt, so tooth engagement and length are the critical selection points. Confirm the profile is HTD 5M and the length is 965 mm against the marking on the old belt or the drive documentation. If the marking is worn, send us the part number and photos of the belt and the drive.
We carry the Optibelt 5MHP 965 for maintenance, engineering and purchasing teams. To request a quote, send the part number by WhatsApp or email; we reply promptly and can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 965mm
Frequently asked questions
- What should I check on the drive before fitting the 5MHP 965?
- Inspect the sheaves for wear, burrs or debris, confirm alignment and mounting, and verify the center distance and take-up range. Also check bearings and shafts for damage that could have caused the previous belt to fail.
- How do I confirm the 5MHP 965 is the correct belt?
- Match the profile and length to the drive: the profile is HTD 5M and the length is 965 mm. Use the marking on the old belt or the drive documentation, and contact us if anything is unclear.
- How do I request a quote for the Optibelt 5MHP 965?
- Send the part number 5MHP 965 by WhatsApp or email. We reply promptly and can help confirm the right belt or suggest an equivalent.