Timing belt Optibelt 5MHP 950
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega HP
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 5MHP 950 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5MHP 950 and any equivalents.
This Optibelt 5MHP 950 belt is an HTD 5M timing belt from the Omega HP series. It has a 950 mm length and a 5 mm pitch, and it is used in drives that need synchronous power transmission without slip.
HTD 5M timing belts are common on light-duty industrial drives such as small conveyors, packaging equipment, and compact motion systems. The 5 mm pitch and 950 mm length make this belt suitable for applications where the drive layout calls for that specific size. If you are replacing a worn belt, the most reliable starting point is the marking on the back of the old belt. Confirm that it reads HTD 5M and 950 mm, then match the part number 5MHP 950.
When the old marking is unreadable, measure the belt width and count the teeth if possible. The profile and length are the critical dimensions; a belt with the same length but a different profile will not run correctly. If you need help confirming the right belt or want us to check an equivalent, send the part number, the belt marking, and a photo of the drive to our team by WhatsApp or email. We carry the Optibelt 5MHP 950 and can quote it for you.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 950mm
Frequently asked questions
- What does the 5MHP 950 part number refer to?
- It identifies an Optibelt Omega HP timing belt with an HTD 5M profile, a 950 mm length, and a 5 mm pitch. Use the full part number when requesting a quote.
- How can I confirm this is the correct belt for my drive?
- Check the marking on the back of your existing belt. It should show the profile and length. If it reads HTD 5M and 950 mm, this belt matches those dimensions. You can also send us a photo of the drive and the old belt for verification.
- What information should I send for a quote?
- Send the part number 5MHP 950, the quantity you need, and any details from the old belt marking. If you are unsure, include a photo of the belt and the pulleys so we can help confirm the fit.