Timing belt Optibelt 5MHP 940
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega HP
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 5MHP 940 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5MHP 940 and any equivalents.
This Optibelt 5MHP 940 is an Omega HP timing belt with an HTD 5M profile and a 940 mm length. It is the belt to specify when you are matching the one coming off the drive. The 5 mm pitch identifies the tooth spacing for the HTD 5M profile.
The most reliable way to match a timing belt is to read the marking on the back of the old belt. The 5MHP 940 code, the HTD 5M profile and the 940 mm length should line up with what is printed on the belt you are replacing. If the old belt is worn or the marking is gone, measure the length and count the teeth to confirm the profile and pitch before ordering.
On a timing belt, the profile and pitch must match the pulleys, and the length must match the drive layout. This belt uses the HTD 5M profile with a 5 mm pitch and a 940 mm length. When you request a quote, send the part number 5MHP 940 and, if you have it, a photo of the old belt marking so we can help you confirm the right belt.
If you are replacing a belt on a drive that runs more than one belt, inspect all of them at the same time. A matched set keeps the drive running evenly. We carry the Optibelt 5MHP 940 Omega HP timing belt and can help you confirm it against the belt you are replacing.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 940mm
Frequently asked questions
- How do I confirm the Optibelt 5MHP 940 is the right belt for my drive?
- Check the marking on the back of the belt you are replacing. The part number 5MHP 940, the HTD 5M profile and the 940 mm length should match. If the marking is not clear, measure the belt length and confirm the profile and pitch with the pulley dimensions.
- What should I send to request a quote for this belt?
- Send the part number 5MHP 940, the quantity you need, and a photo of the old belt marking if you have one. That lets us confirm the profile, pitch and length before quoting.
- Can you help if I am not sure between this belt and another?
- Yes. Send the part number from the old belt and the drive details. We will check the profile, pitch and length against the 5MHP 940 and help you confirm the correct belt.