Timing belt Optibelt 5MHP 700
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega HP
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 5MHP 700 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5MHP 700 and any equivalents.
When a timing belt needs replacing, the most reliable starting point is the marking on the back of the old belt. This page covers the Optibelt 5MHP 700 from the Omega HP series, an HTD 5M profile timing belt with a 700 mm length and a 5 mm pitch.
Read the old belt before ordering. Confirm the profile reads HTD 5M, the length reads 700 mm, and the part number reads 5MHP 700. If the back of the belt is worn or dirty, clean it carefully and photograph the marking so the characters are legible. Send that photo with your quote request.
For a correct match, the profile and length must agree with the drive. This belt uses the HTD 5M profile and a 5 mm pitch, with a 700 mm length. If the marking is unreadable, measure the belt and note the tooth profile so we can help confirm the right belt or suggest an equivalent.
We carry the Optibelt 5MHP 700 for maintenance, engineering and purchasing teams. To request a quote, send the part number 5MHP 700 by WhatsApp or email. If you are replacing more than one belt on the same drive, include all the markings so we can review the set.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 700mm
Frequently asked questions
- How do I identify the correct Optibelt timing belt from the old one?
- Look at the marking printed on the back of the old belt. The part number 5MHP 700, the profile HTD 5M, the length 700 mm and the pitch 5 mm should all be visible. If any character is unclear, clean the belt and take a photo in good light.
- What information should I send with my quote request?
- Send the part number 5MHP 700 and, if possible, a photo of the old belt marking. If the marking is missing, provide the profile and length you measured. We will confirm the belt or suggest an equivalent.
- Can you help if the old belt marking is worn off?
- Yes. Measure the length and identify the tooth profile as HTD 5M if possible. Send those details and any photos of the drive. We will help confirm the right belt or suggest an equivalent.