Timing belt Optibelt 5MHP 720
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega HP
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 5MHP 720 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5MHP 720 and any equivalents.
This Optibelt Omega HP timing belt is identified by the part number 5MHP 720. It has an HTD 5M profile with a 5 mm pitch and a 720 mm length. Use these three values to confirm it matches the belt you are replacing.
Timing belts in the HTD 5M profile are used in synchronous drives where the belt teeth mesh with matching pulleys to keep the driven shaft in step with the driver. Typical equipment includes industrial machinery, pumps, compressors and other drives where slip is not acceptable. On a timing belt, the profile and pitch must match the pulley grooves, and the length must match the drive layout.
To confirm fit, read the marking on the back of the old belt and compare it with the profile, pitch and length above. Check that the pulley grooves are clean and undamaged and that the belt sits correctly in them. If the drive uses more than one belt, replace them as a set so the load is shared evenly.
When you request a quote, send the part number 5MHP 720 along with the profile, pitch and length from your belt or drive documentation. If you are unsure of the exact number, send a photo of the belt marking and the pulley, and our team can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 720mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Check the profile, pitch and length against your pulley and drive layout. The belt is HTD 5M with a 5 mm pitch and a 720 mm length. The marking on the back of your old belt is the best reference.
- What should I send to request a quote?
- Send the part number 5MHP 720 by WhatsApp or email. Include the profile, pitch and length if you have them, or a photo of the belt marking and pulley.
- Should I replace more than one belt at a time?
- If the drive uses multiple belts, replace them as a set. This keeps the load shared evenly and avoids mixing a new belt with worn ones.