Timing belt Optibelt 5MHP 670
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega HP
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 5MHP 670 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5MHP 670 and any equivalents.
When you need to replace a timing belt, the marking on the back of the old belt is your most reliable starting point. The Optibelt 5MHP 670 from the Omega HP series is an HTD 5M profile belt with a 670 mm length and a 5 mm pitch. We carry this belt and can help you confirm it matches your drive.
Read the old belt before you order. Look for the profile and length: HTD 5M and 670 mm. The Optibelt 5MHP 670 matches those two figures, so if your current belt is marked the same way, this is the direct replacement. If the marking is worn or unreadable, measure the belt or send us a photo of the drive and the old belt.
This is a timing belt, also called a synchronous belt. It has a 5 mm pitch and an HTD 5M profile, which means the teeth are spaced every 5 mm along the 670 mm length. That combination is common on compact drives where exact synchronization is required. The Omega HP series is built for reliable power transmission in industrial equipment.
To request a quote, send the part number 5MHP 670 by WhatsApp or email. If you are unsure whether this is the right belt, include the marking from your old belt, the drive's sprocket details, or a photo. Our team will confirm the profile and length and suggest an equivalent if needed.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 670mm
Frequently asked questions
- How do I confirm the Optibelt 5MHP 670 fits my drive?
- Check the marking on your old belt. If it shows HTD 5M and 670 mm, the 5MHP 670 is the matching belt. If the marking is unclear, send us the old belt's details or a photo of the drive.
- What do the profile and length mean on this belt?
- The profile is HTD 5M, which means the belt has a 5 mm pitch between teeth. The length is 670 mm. These two dimensions are the key ones for matching a timing belt to a drive.
- Can you help if I need a different length or profile?
- Yes. Send us the part number you need or the marking from your old belt. We can check our range and suggest an equivalent belt with the same profile and length.