V-belt Optibelt 3-5V 2500 BP2
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- KB Blue Power 2
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 3-5V 2500 BP2 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 3-5V 2500 BP2 and any equivalents.
The Optibelt 3-5V 2500 BP2 is a banded V-belt from the KB Blue Power 2 series, with a length of 6350 mm. When you need to replace a belt on a multi-groove drive, the marking on the back of the old belt is the most reliable starting point. Read it before you order.
The code on the back of a banded V-belt identifies the profile, the length and the construction. On this belt the marking is 3-5V 2500 BP2. Transcribe it exactly as it appears, including any spaces, dashes or suffixes, because those characters separate one banded belt from another in the same profile. A photo of the marking is often clearer than a handwritten note, especially when the belt is worn.
Once you have the marking, send it to us by WhatsApp or email. We carry the Optibelt 3-5V 2500 BP2 and can confirm it against your drive. If the marking is faded or the belt has been running without a legible code, measure the length and count the ribs, then send those details with the drive information. The length of this belt is 6350 mm.
Banded V-belts are used where several V-belts run in parallel and must stay matched, so replacing the full set at once keeps the drive running evenly. Check the sheaves for wear and alignment while the belts are off, and note any glazing or cracking on the old set. That inspection takes a few minutes and helps you avoid a repeat failure.
Dimensions
- Length
- 6350mm
Frequently asked questions
- What marking should I look for on the old belt?
- Look for the code printed on the back of the belt. For this belt the marking is 3-5V 2500 BP2. Send that code exactly as it appears, including spaces and suffixes.
- Can you help if the marking is no longer readable?
- Yes. Send the length and the number of ribs along with details of the drive. The length of the Optibelt 3-5V 2500 BP2 is 6350 mm, which you can compare against your measurement.
- Should I replace all the belts on the drive at the same time?
- On a banded V-belt drive, the belts work as a set. Replacing the full set at once helps keep the load shared evenly across the grooves and avoids mixing new and worn belts.