V-belt Optibelt 3-5V 2240 BP2
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- KB Blue Power 2
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 3-5V 2240 BP2 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 3-5V 2240 BP2 and any equivalents.
The Optibelt 3-5V 2240 BP2 is a banded V-belt from the KB Blue Power 2 series, with a length of 5690 mm. It is the belt to specify when you are replacing a banded 5V drive and need the same profile and length. Use the marking on the old belt to confirm this part number before you request a quote.
Matching starts with the belt you are removing. Read the marking on the back of the old belt and compare it to 3-5V 2240 BP2. The 5V profile and the 5690 mm length are the two values that must line up; if the old belt is worn or the marking is unreadable, measure the length and note the number of ribs in the banded set.
A banded V-belt ties the ribs together so they run as one unit on a multi-groove drive. When you replace it, check the sheave grooves for wear and confirm that all ribs seat evenly. If the drive runs more than one belt, replace the full set at the same time so the load stays shared across the banded belts.
Send the part number 3-5V 2240 BP2 by WhatsApp or email and our team will reply promptly. If you are unsure the old belt matches, include the marking from the back of the belt and a photo of the drive. We carry the Optibelt KB Blue Power 2 line and can help confirm the right belt for your application.
Dimensions
- Length
- 5690mm
Frequently asked questions
- How do I confirm this is the belt I need to replace?
- Read the marking on the back of the belt you are removing. If it shows 3-5V 2240 BP2, this is the same profile and length. If the marking is gone, measure the length and count the ribs in the banded set.
- What does the 5690 mm length refer to?
- It is the length of the belt as listed for the Optibelt 3-5V 2240 BP2. Match it to the length of the belt being replaced so the drive tension and sheave alignment stay correct.
- What should I send to request a quote?
- Send the part number 3-5V 2240 BP2 by WhatsApp or email. If you are matching an old belt, include the marking from the back of the belt and the number of ribs so we can confirm the right belt.