V-belt Optibelt 22 x 3302 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 22 x 3302 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 22 x 3302 Li and any equivalents.
This Optibelt VB S=C Plus belt is a classical V-belt with a C profile and a length of 3302 mm. It measures 22 mm across the top and 14 mm in height, with a 40-degree angle. Before fitting it, inspect the drive and sheaves so the new belt runs correctly.
Check sheave grooves for wear, cracks, or embedded debris, and confirm the grooves match the 22 mm top width and 40-degree angle of this C-profile belt. Worn or misaligned sheaves can shorten belt life and cause slippage even when the belt itself is correct. Verify that the sheave alignment and center distance allow the 3302 mm length to be tensioned to the drive manufacturer's specification.
Look at the old belt's back marking to confirm the part number and profile before ordering. This belt is marked 22 x 3302 Li, which identifies the top width and length; the VB S=C Plus series is a classical V-belt construction. If the drive uses multiple belts, replace them as a set so the load is shared evenly and the sheaves are not overloaded by mismatched belts.
To request a quote, send the part number 22 x 3302 Li, the quantity, and any drive details you have. Our team can confirm the belt matches your application or suggest an equivalent based on the profile and length you provide.
Dimensions
- Section
- C
- Length
- 3302mm
Frequently asked questions
- What should I check on the drive before installing this belt?
- Inspect sheave grooves for wear or damage, confirm the groove profile matches the 22 mm top width and 40-degree angle, and check alignment and tensioning range for the 3302 mm length.
- How do I identify this belt on the old part?
- Look for the marking 22 x 3302 Li on the back of the belt. That identifies the top width and length for this Optibelt VB S=C Plus classical V-belt.
- What information do you need for a quote?
- Send the part number 22 x 3302 Li, the quantity required, and any drive details. We will confirm the belt or help you find an equivalent.