V-belt Optibelt 22 x 3200 Li

OPTIBELT 22 x 3200 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 22 x 3200 Li and any equivalents.

Matching a classical V-belt starts with the marking on the belt you are replacing. This Optibelt VB S=C Plus belt is listed as 22 x 3200 Li, profile C, with a 3200 mm length, a 22 mm top width, a 14 mm height and a 40 degree angle. Compare those values to the old belt before you request a quote.

The profile and the length are the two values to check first. A C profile belt will not sit correctly in a sheave cut for a different profile, and a belt that is not the same length will not tension or run as the drive was set up. Read the marking on the back of the old belt and compare it to the 22 x 3200 Li designation, the C profile and the 3200 mm length listed here.

If the marking is worn or unreadable, measure the old belt and note the drive it runs on. Send the part number, the profile and the length, and the team can confirm this Optibelt belt or suggest an equivalent. A photo of the old belt and the sheave can help confirm the profile.

Ordering the correct belt is one part of the job. Inspect the sheaves for wear, check alignment and confirm the tension is set to the drive manufacturer's specification before the belt is run.