V-belt Optibelt 22 x 3404 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 22 x 3404 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 22 x 3404 Li and any equivalents.
The Optibelt VB S=C Plus 22 x 3404 Li is a classical V-belt with a C profile, a 22 mm top width, a 14 mm height and a 40-degree angle. Its length is 3404 mm. We carry this belt for maintenance, engineering and purchasing teams that need to match an existing drive.
When you request a quote, include the full part number 22 x 3404 Li so we can confirm the belt you need. If you are replacing a belt on an existing drive, also send the profile marking from the old belt and the drive sheave dimensions. This helps us verify that the C profile and 3404 mm length are the correct match for your application.
The marking on the back of the belt is the fastest way to identify it. Look for the profile letter and the length in millimeters, then compare them with the 22 x 3404 Li data. If the old belt is worn or the marking is unreadable, measure the top width and height with a caliper and note the length from the drive documentation.
For drives that use multiple belts, replace all belts in the set at the same time to keep load sharing even. Inspect sheaves for wear, alignment and debris before installing the new belt. If you need help confirming the right belt or an equivalent, send the part number and drive details by WhatsApp or email and our team will reply promptly.
Dimensions
- Section
- C
- Length
- 3404mm
Frequently asked questions
- What do I need to send for a quote on this belt?
- Send the part number 22 x 3404 Li, the quantity, and any drive details you have, such as the old belt marking or sheave dimensions. Our team will confirm the correct belt for your application.
- How can I identify this belt on a drive?
- Check the marking on the back of the belt for the profile and length. The Optibelt VB S=C Plus 22 x 3404 Li has a C profile and a length of 3404 mm, with a 22 mm top width and a 14 mm height.
- Should I replace all belts on a multi-belt drive at once?
- Yes. Replacing all belts in the set at the same time helps maintain even load sharing and reduces the risk of uneven wear. Inspect the sheaves for wear and alignment before installation.