V-belt Optibelt 22 x 2750 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 22 x 2750 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 22 x 2750 Li and any equivalents.
The Optibelt VB S=C Plus is a classical V-belt with a C profile and a length of 2750 mm. Its top width is 22 mm, height is 14 mm, and the included angle is 40 degrees. This page covers how to read the marking on your old belt so you can match the replacement correctly.
The marking on the back of the old belt is the most reliable reference. Look for the code 22 x 2750 Li. The 22 indicates the top width in millimeters, and 2750 Li is the datum length in millimeters. The profile letter C confirms the cross-section family. If the marking is worn or missing, measure the top width and the outside length of the belt with a caliper and tape, then compare those measurements to the values above.
The Optibelt VB S=C Plus is a classical V-belt, not a narrow wedge belt or a cogged belt. It is used in industrial drives that accept a C profile. When you replace it, check the pulley grooves for wear and make sure the new belt sits correctly in the groove. If the drive uses multiple belts, replace all belts at the same time to keep the load evenly distributed.
To request a quote, send the part number 22 x 2750 Li and the quantity you need by WhatsApp or email. If you have the old belt, include a clear photo of the back marking and the profile. Our team can confirm the correct belt or suggest an equivalent from the data you provide.
Dimensions
- Section
- C
- Length
- 2750mm
Frequently asked questions
- How do I read the marking on the old belt?
- The marking 22 x 2750 Li gives the top width and the datum length. The 22 is the top width in millimeters, and 2750 Li is the length in millimeters. The profile is C.
- Can I use this belt if the old marking is unreadable?
- Yes. Measure the top width and the outside length of the old belt. The replacement should have a top width of 22 mm and a length of 2750 mm, with a C profile.
- What information should I send for a quote?
- Send the part number 22 x 2750 Li, the quantity, and a photo of the old belt marking if possible. We will confirm the belt or suggest an equivalent.