V-belt Optibelt 22 x 2718 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 22 x 2718 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 22 x 2718 Li and any equivalents.
This Optibelt VB S=C Plus belt is a classical V-belt with a C profile, a top width of 22 mm and a height of 14 mm. The listed length is 2718 mm, and the belt is built with a 40-degree angle. Before you fit it, inspect the drive and the sheaves so the new belt runs true.
A belt change is the right moment to check the sheaves. Look for worn grooves, corrosion, burrs or a shiny wear pattern, and confirm the sheaves are aligned and free of play. A groove that has worn wide or a sheave that is out of line will shorten the life of any new classical V-belt, including this C-profile belt.
Confirm the marking on the old belt and match it to this part number: profile C, 22 x 2718 Li, 40-degree angle. If the drive uses more than one belt, fit the full set together so the load stays shared evenly across the grooves.
MR Industrial Accessories LLC supplies this Optibelt belt to maintenance, engineering and purchasing teams in the United States, Canada, Mexico and South America. Send the part number 22 x 2718 Li by WhatsApp or email and the team will reply promptly to confirm the belt for your drive.
Dimensions
- Section
- C
- Length
- 2718mm
Frequently asked questions
- What should I check on the drive before fitting this belt?
- Inspect the sheave grooves for wear, corrosion or burrs, check that the sheaves are aligned, and make sure there is no play in the bearings or mounts. Correct any issue before the new belt goes on.
- How do I confirm this is the right belt?
- Read the marking on the back of the old belt and compare it with this belt: profile C, 22 x 2718 Li, 40-degree angle. If the marking matches, send that part number to MR for a quote.
- Should I replace more than one belt at a time?
- If the drive uses a set of belts, replace the whole set together. Mixing a new belt with used belts can leave one belt carrying more load than the others.