V-belt Optibelt 22 x 2800 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 22 x 2800 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 22 x 2800 Li and any equivalents.
This Optibelt VB S=C Plus belt is a classical V-belt in profile C, with a top width of 22 mm, a height of 14 mm, a 40-degree angle and a length of 2800 mm. It is the belt to reach for when you are replacing a worn classical V-belt and want to confirm the match before the drive goes back into service.
The most reliable way to match this belt is to read the marking on the back of the belt being replaced. Compare the profile and the length to the 22 x 2800 Li marking on this Optibelt belt. Profile C, 22 mm top width, 14 mm height and 2800 mm length are the figures that matter. If the old belt is worn or the marking is gone, measure across the top of the belt and around its length, then check the drive sheave groove to confirm the profile.
A classical V-belt that has run for some time will not measure the same as it did when new, so use the original marking as your reference rather than the stretched belt alone. This Optibelt VB S=C Plus belt is supplied in profile C at 2800 mm, which lets you match the drive without guessing. When you request a quote, send the part number and the drive details so the belt can be confirmed against your application.
Dimensions
- Section
- C
- Length
- 2800mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the belt you are replacing. Match the profile and length to this belt: profile C, 22 mm top width, 14 mm height, 40-degree angle and 2800 mm length. If the marking is unreadable, measure the old belt and the sheave groove.
- What should I send to request a quote?
- Send the part number 22 x 2800 Li, along with the profile and length from the belt being replaced. If you have the drive details, include those as well so the belt can be checked against your equipment.
- Can I replace just one belt on a multi-belt drive?
- On a drive that uses more than one belt, replacing the full set at the same time keeps the belts matched and avoids uneven loading. Use the marking on the existing belts to confirm the profile and length for the whole set.