V-belt Optibelt 22 x 2450 Li

OPTIBELT 22 x 2450 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 22 x 2450 Li and any equivalents.

This Optibelt VB S=C Plus belt is a classical V-belt with a C profile and a length of 2450 mm. It is identified by the code 22 x 2450 Li, with a top width of 22 mm, a height of 14 mm, and a 40-degree angle. Classical V-belts of this type are common on industrial drives where a single belt runs in a C-section pulley.

To confirm fit, check that the drive uses a C-profile pulley and that the belt's length matches the application. The 2450 mm length is measured as listed for this belt. The 22 mm top width and 14 mm height are the key dimensions to compare against the old belt or the pulley groove. The 40-degree angle is standard for this profile.

When replacing, read the marking on the back of the old belt. The code 22 x 2450 Li gives the width and length, and the profile C confirms the cross-section. If the old belt is worn or the marking is unreadable, measure the top width and the outside length to verify. A belt that is too wide or too narrow will not sit correctly in the pulley groove.

For a quote, send the part number 22 x 2450 Li, the brand Optibelt, and the quantity you need. If you are unsure whether this is the correct belt, include the drive details and a photo of the old belt marking. The team can help confirm the right belt or suggest an equivalent.