V-belt Optibelt 22 x 2413 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 22 x 2413 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 22 x 2413 Li and any equivalents.
The Optibelt VB S=C Plus is a classical V-belt with a C profile and a length of 2413 mm. Its 22 mm top width, 14 mm height and 40-degree angle suit standard C-profile sheaves. Before fitting, check the drive and sheaves to avoid premature belt failure.
Inspect sheave grooves for wear, rust or embedded debris. Worn grooves allow the belt to sit too deep, reducing grip and causing slip. Check sheave alignment with a straightedge or laser; misalignment shortens belt life and can cause edge wear. Confirm the sheave profile matches the C profile and that the groove angle is compatible with the belt's 40-degree angle.
Verify the driven equipment can be turned by hand and that no bearings are seized. Check the belt tensioning mechanism for free movement and adequate adjustment range. If the drive uses multiple belts, replace them as a set to maintain even load sharing. Record the belt marking, including 22 x 2413 Li, before removal so the replacement matches exactly.
Dimensions
- Section
- C
- Length
- 2413mm
Frequently asked questions
- What does 22 x 2413 Li mean on this Optibelt belt?
- The marking indicates a top width of 22 mm and a length of 2413 mm. The Li suffix is part of the belt's designation. Use these values to match the belt to your drive.
- How do I confirm this C-profile belt fits my sheaves?
- Check that the sheave groove is designed for a C profile and that the belt sits correctly without bottoming out. The belt has a 40-degree angle and a 14 mm height. If the old belt is a C profile with the same length, this belt is the correct profile match.
- What should I send to request a quote for this belt?
- Send the part number 22 x 2413 Li, the brand Optibelt, and the quantity you need. If you are unsure, include a photo of the belt marking and the sheave details. Our team will confirm the belt and reply by WhatsApp or email.