V-belt Optibelt 22 x 2464 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 22 x 2464 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 22 x 2464 Li and any equivalents.
This Optibelt VB S=C Plus belt is a classical V-belt with a C profile. The marking 22 x 2464 Li gives you the top width and the length, so you can match it directly to your drive specification.
The profile is C, with a top width of 22 mm and a height of 14 mm. The included angle is 40 degrees. The length is 2464 mm. These figures come straight from the belt marking, which is the fastest way to confirm a replacement before you order.
If you are replacing an existing belt, read the marking on the back. A belt marked 22 x 2464 Li corresponds to this Optibelt VB S=C Plus item. When the old belt is worn or the marking is gone, measure the top width and the outside length, then send those numbers for confirmation.
For a quote, send the part number 22 x 2464 Li, the profile C, and the length 2464 mm. If you are unsure whether this is the correct belt for your drive, include a photo of the old belt and the drive sheaves. We will help you confirm the right belt or suggest an equivalent.
Dimensions
- Section
- C
- Length
- 2464mm
Frequently asked questions
- What do the numbers 22 x 2464 Li mean on this Optibelt belt?
- The 22 is the top width in millimeters, and 2464 is the length in millimeters. The Li indicates the length is measured on the inside of the belt. This belt has a C profile, a top width of 22 mm, a height of 14 mm, and a 40-degree angle.
- How do I confirm this is the right replacement belt?
- Check the marking on your old belt. If it reads 22 x 2464 Li and the profile is C, this Optibelt VB S=C Plus belt matches those dimensions. If the marking is unreadable, measure the top width and the length, then send those values for confirmation.
- What information should I send to request a quote?
- Send the part number 22 x 2464 Li, the profile C, and the length 2464 mm. If you are matching a drive, include the old belt marking or a photo of the belt and sheaves. We will reply with a quote or help you confirm an equivalent.