V-belt Optibelt 22 x 2060 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 22 x 2060 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 22 x 2060 Li and any equivalents.
When replacing a classical V-belt, the most reliable approach is to match the belt you are removing. This Optibelt VB S=C Plus belt is profile C with a length of 2060 mm and a 22 mm top width, so you can compare it directly against the old belt before ordering.
Start by reading the marking on the back of the old belt. Look for the profile letter and the length figure, then compare them with this belt's profile C and 2060 mm length. The top width of 22 mm and height of 14 mm are also useful checks if the marking is worn or unreadable. The 40-degree angle is part of the belt's construction and is not measured on site.
If the old belt is too damaged to read, measure its outside length and top width and send those figures with your quote request. Our team can confirm whether this profile C, 2060 mm belt is the correct match or suggest an equivalent. For drives using multiple belts, replace all belts in the set at the same time so they share the load evenly.
Dimensions
- Section
- C
- Length
- 2060mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Compare the profile letter and length marking on your old belt with profile C and 2060 mm. If the marking is unreadable, send the top width and outside length with your request and we will help confirm the match.
- What should I send to request a quote?
- Send the part number 22 x 2060 Li, or the profile and length from your old belt, by WhatsApp or email. Include the drive details if you have them and we will reply promptly.
- Can I replace just one belt in a multi-belt drive?
- For drives that use more than one belt, it is good practice to replace the full set at the same time. This keeps belt tension and load sharing consistent across the drive.