V-belt Optibelt 22 x 2000 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 22 x 2000 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 22 x 2000 Li and any equivalents.
When you need to replace a classical V-belt, the surest reference is the belt in your hand. This Optibelt VB S=C Plus belt is a C-profile classical V-belt, 22 mm top width, 14 mm height, 40 degree angle and 2000 mm length. Match those markings to your old belt before you request a quote.
Read the back of the old belt and compare it with this listing. The profile should read C, the top width 22 mm, the height 14 mm and the length 2000 mm. The 40 degree angle is the included angle of the belt cross-section. If the old belt is worn or the marking is unreadable, measure the top width and the outside length and send those dimensions with your request.
This is a classical V-belt, not a narrow wedge, cogged, banded or synchronous belt. Confirm the drive uses a classical C profile before ordering. If the drive runs more than one belt, replace the full set so the belts share the load evenly. Check the sheave grooves for wear and make sure the new belt sits at the correct height in the groove.
To request a quote, send the part number 22 x 2000 Li, or send the profile, top width, height, angle and length from your old belt. Our team can confirm the belt or suggest an equivalent. Quotes are handled by WhatsApp or email.
Dimensions
- Section
- C
- Length
- 2000mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the marking on the old belt. It should show the C profile, 22 mm top width, 14 mm height and 2000 mm length. The 40 degree angle is the belt cross-section angle. If those values match, this is the correct size.
- What should I send for a quote?
- Send the part number 22 x 2000 Li, or send the profile, top width, height, angle and length from the belt you are replacing. Photos of the back of the belt and the sheave can also help our team confirm the match.
- Should I replace all belts on a multi-belt drive at the same time?
- Yes. On a drive with more than one belt, replacing the full set helps keep tension and load sharing even. Mixing new and worn belts can cause the new belt to carry more than its share.