V-belt Optibelt 22 x 2108 Li

OPTIBELT 22 x 2108 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 22 x 2108 Li and any equivalents.

This Optibelt VB S=C Plus belt is a classical V-belt with a C profile, a top width of 22 mm, a height of 14 mm, a 40-degree angle, and a length of 2108 mm. Before you fit it, take a few minutes to check the drive and sheaves so the new belt runs true from the start.

Inspect each sheave groove for wear, rust, or buildup that can keep the belt from seating. Check that the sheaves are aligned and that the groove profile matches the 40-degree angle and the 22 mm top width of this belt. Confirm the driven and driving sheaves turn freely and that the take-up has enough travel to tension the 2108 mm length correctly.

Look at the old belt as you remove it. A worn or glazed belt can point to a sheave problem, so compare the old belt marking with the data here: profile C, 22 mm top width, 14 mm height, and 2108 mm length. If the drive uses more than one belt, replace the full set at the same time so the load stays even across all belts.

When you are ready to order, send the part number 22 x 2108 Li, or the marking from the back of the old belt, by WhatsApp or email. We carry the Optibelt VB S=C Plus line and will confirm the right belt for your drive or suggest an equivalent.