V-belt Optibelt 17 X 5334 CP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Conveyor Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 17 X 5334 CP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 17 X 5334 CP and any equivalents.
The Optibelt 17 X 5334 CP is a classical V-belt in the Conveyor Power series. It has a B profile, a 5334 mm length, a 17 mm top width, an 11 mm height, and a 40° angle. Use these dimensions to match it to the belt you are replacing.
Start by reading the marking on the back of the old belt. If it shows 17 X 5334 CP, this is the same belt. If the marking is worn, measure the top width and the outside length, then compare them to the 17 mm top width and 5334 mm length listed here. The B profile and 40° angle are the other two values to confirm before ordering.
A classical V-belt can stretch or wear unevenly, so a used belt may not measure exactly like a new one. When the drive uses more than one belt, replace the full set at the same time to keep the load shared across all grooves. Inspect the sheaves for wear, alignment, and debris as part of the same job.
To request a quote, send the part number 17 X 5334 CP by WhatsApp or email. If you are unsure whether this is the correct belt, include the old belt's marking and the drive details. The team can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- B
- Length
- 5334mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Check the marking on the back of the old belt for 17 X 5334 CP. If it is unreadable, measure the top width and the outside length and compare them to the 17 mm top width and 5334 mm length listed for this belt.
- What are the profile and angle of this belt?
- This Optibelt belt has a B profile and a 40° angle. The top width is 17 mm and the height is 11 mm.
- What information should I send with my quote request?
- Send the part number 17 X 5334 CP. If you want the team to confirm the match, also include the old belt's marking and details about the drive.