V-belt Optibelt 17 x 5300 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 17 x 5300 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 17 x 5300 Li and any equivalents.
When you need to replace a classical V-belt, the most reliable starting point is the marking on the back of the old belt. This Optibelt VB S=C Plus belt is identified by its profile, B, and its length, 5300 mm, and the code 17 x 5300 Li. We carry this belt for maintenance, engineering and purchasing teams who want to match what is already on the drive.
Read the old belt before you remove it. Note the full marking, including the brand, the series, the profile and the length. For this belt, the profile is B, the top width is 17 mm and the height is 11 mm, with a 40-degree angle. The length is 5300 mm. If the old belt is worn or the marking is hard to read, measure the top width and the outside length and send those figures with a photo of the belt and the drive.
This is a classical V-belt, not a narrow wedge belt, cogged belt, banded belt or synchronous belt. It is used on industrial drives where a classical profile is specified. When you replace it, check the sheave grooves for wear and make sure the new belt sits correctly in the groove. If the drive uses more than one belt, replace all belts in the set at the same time so the load is shared evenly.
Dimensions
- Section
- B
- Length
- 5300mm
Frequently asked questions
- How do I confirm this is the right belt?
- Compare the marking on your old belt with the code 17 x 5300 Li, the profile B, and the length 5300 mm. If the old marking is unreadable, measure the top width and the outside length and send those measurements with a photo of the drive.
- What information should I send for a quote?
- Send the part number 17 x 5300 Li, the profile B, and the length 5300 mm. If you have the old belt, include a photo of the back marking. If you are unsure, our team can help confirm the right belt or suggest an equivalent.
- Can I replace just one belt on a multi-belt drive?
- For drives that use more than one belt, it is standard practice to replace all belts in the set at the same time. This keeps the length and tension consistent across the drive and helps avoid uneven loading.