V-belt Optibelt 17 X 5600 CP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Conveyor Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 17 X 5600 CP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 17 X 5600 CP and any equivalents.
This Optibelt 17 X 5600 CP belt is a classical V-belt from the Conveyor Power series. It has a B profile, a top width of 17 mm, a height of 11 mm, a 40-degree angle and a length of 5600 mm. It is used in industrial drives where a classical V-belt is specified.
To confirm fit, compare the existing belt's profile and length against the B profile and 5600 mm length shown here. Check that the drive's sheave grooves are cut for a 40-degree angle and that the belt's top width and height match the 17 mm and 11 mm dimensions. A belt that is too wide or too tall will not seat correctly in the groove.
Classical V-belts like this are common on fans, pumps, compressors and other industrial machinery. When you replace a belt, inspect the sheaves for wear, alignment and debris. If the drive uses multiple belts, replace them as a set so the load is shared evenly.
For a quote, send the part number 17 X 5600 CP, the quantity and any details from the old belt's back marking. If you are unsure of the profile or length, include photos of the belt and the drive nameplate. We carry Optibelt and can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- B
- Length
- 5600mm
Frequently asked questions
- What are the dimensions of this Optibelt belt?
- It has a B profile, a top width of 17 mm, a height of 11 mm, a 40-degree angle and a length of 5600 mm.
- How do I confirm this belt fits my drive?
- Check that the existing belt is a B profile, 5600 mm long, and that the sheave grooves are suitable for a 40-degree angle. The belt's 17 mm top width and 11 mm height should match the groove dimensions.
- What information should I send for a quote?
- Send the part number 17 X 5600 CP, the quantity you need and any marking from the old belt. Photos of the belt and drive nameplate can help us confirm the correct replacement.